If your building looks dirty and needs a touch-up, you can potentially do pressure washing at almost any time of year. However, not all times of year are optimal. Unless you have a serious need to clean right now, it’s often better to wait until a good time to do the pressure washing. The right timing can help make the job easier, cheaper, or longer lasting.

The Best Seasons for Pressure Washing

Let’s start from the bottom of the list because this one’s easy.

I. Winter

Winter is a terrible time to pressure wash because the cold weather will interfere with the process and could lead to your walls or other surfaces freezing up before they dry. Worse, if the water makes its way into cracks in the walls or concrete, it could cause those cracks to widen when the water freezes inside. If it’s cold enough, you might even damage your sprayer – and that means expensive pressure washer repair services.

There is rarely, if ever, a good reason to pressure wash in the winter.

II. Autumn

You can do pressure-washing in the Fall, but it’s probably not the best time. With so much junk in the air, falling leaves, etc, it’s easy for a pressure washing job to be undone very quickly. Your walls could end up dirty again a month later.

The main benefit here is that if you’re looking to hire pressure-washing services, fall is usually a slow season. So, it might be easier to schedule the work as the company will not be as backed up with work. Plus, if the exterior is filthy, it’s probably better to get that gunk off before winter hits, even if you have to redo the job in the spring.

III. Spring

Spring can be an excellent time for pressure-washing, with a couple of caveats. The mild weather will make a difficult job a bit easier, and rising temperatures mean that surfaces will be able to dry off fairly quickly. It’s also a great way to knock off any accumulated grime from last Fall/Winter and start your year off with a great-looking building.

However, there is a similar issue to Fall, where there’s potentially a lot of junk in the air, especially pollen from blooming plants. Plus, there are a lot of storms, so check the weather before washing.

IV. Summer

In many ways, Summer is the best overall time for pressure washing. The high temperatures, generally low winds, and lack of rainfall will all help the pressure-washing work effectively, and last for a long time. Not to mention having longer days for doing difficult jobs.

However, the high temperatures can be a threat to anyone doing the washing, so be sure to stay safe in the sun. Also, this is typically the busiest season for pressure-washing services, so you may end up paying extra if you hire the work out.

Get Pressure Washer Repair Services

Crown Cleaning Systems is Ohio’s choice for the best in pressure washers and pressure washer repair services. If your building or commercial facility  needs cleaning, contact us to explore our range of products!

As the cold season sets in, the art of maintaining pristine surfaces demands a touch of expertise. Here, Crown Cleaning Systems discusses the do’s and don’ts of Winter pressure washing, ensuring your outdoor spaces remain both clean and safe. From keeping your surroundings safe to maximizing the efficiency of pressure washing chemicals, we’ve got you covered.

What to Do

1. Get Rid of Ice

Whether you are pressure washing during Winter or any other season, it’s essential to consider the direction of the runoff water. If water ends up on a driveway or sidewalk, the result could be swift ice formation. To prioritize safety, it’s advisable to de-ice the surfaces before you commence pressure washing. This can be achieved by applying substances like salt, sand, calcium chloride, or magnesium chloride to the affected area.

• Pressure Wash with Hot Water

The primary concern when pressure washing in Winter is the potential for pipes and surfaces to freeze. To address this issue, use warmer water than your usual pressure washing temperature. Maintaining a temperature range of 180 to 200 degrees Fahrenheit is ideal, as it encourages faster evaporation and reduces the likelihood of surfaces becoming icy.

• Pressure Wash When it’s Sunny

To reduce the risk of freezing pipes and surfaces, a good approach if possible is to do your pressure washing in sunny conditions. Strive to steer clear of shaded areas. When pressure washing try to operate under direct sunlight to deter ice formation. It’s even more advantageous to schedule this activity during the afternoon when temperatures tend to be at their peak.

What Not to Do

1. Forget to Count in Chemical Imbalances

Chemicals often exhibit reduced effectiveness in Winter compared to other seasons. Being aware of the impact of cold weather, it’s important to plan ahead. You may find it necessary to increase the quantity of chemicals you use, compensating for their diminished performance.

• Forget to Wear Protective Clothing

A frequently overlooked aspect of winter pressure washing is ensuring your safety and well-being. In regions with temperatures dropping below freezing, the risk of hypothermia is a genuine concern. Counteracting this, it’s crucial to bundle up by layering your clothing and wearing a waterproof outer layer. Wearing protective equipment like goggles, gloves, and hats is a wise practice. When it comes to footwear, rubber boots with good traction is advisable.

• Forget About Your Fittings

One significant reason behind shutting off outdoor water sources during winter maintenance is the susceptibility to freezing. Given that pressure washing relies on water for cleaning purposes, it becomes important to secure access to indoor fittings for the task.

Contact Crown Cleaning Systems to Learn More About Pressure Washing Chemicals!

If you are planning to pressure wash this Wnter season, visit our store Cleveland store located  in Northeast Ohio to see our wide selection of pressure washing chemicals and other cleaning equipment. Contact us for more information!