Tag Archives: Crown Cleaning Systems

Guide to DIY Power Washer Repair

Posted on by

While you might need professional power washer repairs once your power washer stops working, it can be possible to fix minor malfunctions and issues with some simple DIY tricks. Yes, even if you are not a pro like our team at Crown Cleaning Systems, you can still use our quick guide to get your power washer running in no time.

So, while it’s always smart to call us for repairs, here are a few things you can try to see if you can get your power washer working again.

Prep is Key Before Starting

Ensure that all power washer parts and connections are completely dry and away from water. Also, make sure you put on rubber gloves and boots before starting. It never hurts to be extra careful while working with electrical appliances. These steps may seem obvious,but they can be lifesaving in the event of a mishap.

Inspection and Repairs

  • Lack Of Pressure from Your Washer

Without the proper pressure, no matter how much you use your pressure washer, you will not get the desired results. To get the required pressure, tighten all your connections.This may fix any leaks that might be occurring.

  • Power Washer Shutting Off Repeatedly

There are two possible reasons for this. The first one may be that your motor is generating more power than the machine can hold. When you turn on the motor of your power washer, it generates a lot of pressure inside the machine. Since the machine, in itself, cannot hold a lot of pressure without releasing it, you have to pull the trigger and keep it pressed for it to function. If you fail to do this, the machine will turn itself off to protect the pump from the pressure.

Another reason for this problem could be the water supply. Every machine has its unique minimum water supply requirement to function. If your power washer is not getting the water it needs, it may shut off. You can solve this power washer problem by simply getting a thicker hose or using a different tap.

  • Water Supply Cutting Off

To solve a problem with the water supply, first make sure there are no kinks, turns, or holes in the hose. You should also check the faucet for leaks and the nozzle for blockages. If it is one of these problems, a simple rearrangement, replacement, or cleaning will solve it.

Get Professional Power Washer Repair Near You

Crown Cleaning Systems offers reliable power washer repair services near you. Request a FREE quote from us today!

5 Common Problems that Call for High Pressure Washer Repair

Posted on by

If you own an industrial or commercial pressure washer, you likely rely on it to keep your facility clean and well-maintained. However, like most machinery, ever the best high-powered pressure washers will need occasional repairs and maintenance once in a while.

That’s why here the team from Crown Cleaning Systems has collected some important warning signs you’re in need of high pressure washer repairs!

1. Leaks

If your industrial or commercial pressure washer is leaking, it can mean that there is an issue with one or multiple, seals on the pressure washer. You should stop using it ASAP until the seals can be replaced. A professional can inspect it and identify the seals that need to be switched out.

2. Reduced Pressure

You need your high-powered pressure washer to be working at maximum efficiency to properly maintain your facility. If there’s a noticeable drop in the water pressure, it likely means repairs are in order. This could be due to dirt in its pumping system or a faulty nozzle that needs to be replaced.

3. Pulsating Water

Your pressure washer should be issuing a steady stream of water while it’s on. If the water is pulsating, it often is due to an issue with its inlet and discharge valve. This is because while in use, this valve can often become clogged with some of the debris removed during the pressure washing process. Cleaning the inlet and discharge valve will likely take care of the issue.

4. Overheated Pump

Sometimes, your commercial or industrial pressure washer can suffer from pump overheating or cavitation. This happens when there’s insufficient water being supplied to the pressure washer and can be easily fixed. Simply refer to the owner’s manual to determine the volume of water per-minute your pressure washer needs to function at peak performance levels.

5. Too Much Pressure

When your pressure washer is running harder than normal, it’s often because the water you’re using is too hot, which is why it’s best to always use cold water rather than hot water. However, if you’re using cold water and it’s still happening, it could be because the sun has heated up the water running to your pump, or there’s another mechanical error that requires repairs.

Contact us for high pressure washer repair today!

If you’re having issues with your commercial or industrial pressure washer, contact us online today or call (216) 841-6000 to schedule an estimate or service appointment.

Why Is My Pressure Washer Losing Pressure?

Posted on by

Having your pressure washer lose pressure can be frustrating. Since there is no one thing that can be blamed for this inefficiency, trying to pinpoint the exact cause, and fixing it can prove to be a long and complex process for an amateur. However, experts might not have a similar experience.

Understanding the problem, the experienced technicians of Crown Cleaning Systems have compiled some of the common reasons for lost pressure in washers and tips on fixing them in this blog.

Unclean Discharge Valves

Like any other machine, a pressure washer requires regular cleaning and maintenance to perform optimally. If any part of your pressure washer, like its valves or strainers, is unclean or clogged, its pressure level would be affected. Be sure to always keep your valve assemblies clean and blockage-free to enjoy efficient pressure washing.

Worn Out Nozzles

Old, broken-down nozzles are notorious for depleting the pressure quality of your pressure washer. Fortunately, this can be easily fixed. Just replace the worn-out nozzle with a new one, and it should be fine again. The pressure will be restored to its former glory in no time!

Inlet Plumbing Problem

An inlet plumbing problem essentially means that the air within your pressure washer’s plumbing system is leaking. To fix the leak, you need to disassemble the pressure washer parts, locate, and seal the leak and then reassemble. If you feel the need, call in an expert for pressure washer repairs to get efficient fixes.

Relief Valve Malfunction

Make sure to ensure that your relief valve is clean, adjusted, and free of leaks. Clogging or leakage in this pressure washer part will not only hamper the performance of your washer but it can also potentially damage your relief valve for good which would mean extra expenses in the form of replacement costs.

Slipping Belt

A slipping belt can lead to slipping levels of pressure in your pressure washer. All you need to do to solve this is to tighten or replace the belt as required.

Problem with the Inlet Suction Strainer

Improper sizing or blockage in the parts of your pressure washer can cause pressure loss. Using the correct size of the inlet suction strainers and keeping them clean will help avoid this.

Shop for Karcher Pressure Washer Parts in Ohio!

Crown Cleaning System offers top quality, branded pressure washers, spare parts, and more in Ohio. Enjoy our world-class products and services at bargain prices. Request a FREE quote today!